Corn picker forum

Joe Hoover · Joe Hoover

So we started tearing apart the husking bed on my 234 to get the rubber rolls out to have them rebuilt turns out to be a fair project, can anyone shed any light on how to get the driven gear off the steel husking roll. for some reason it seems to be more of a major project than first thought. Any info or insight...

jdtom · jdtom

Now that I'm finished with all of my corn harvest for 2016, I finally have some time to post some pictures of my ear corn harvest a few weeks ago. I switched to 30-inch rows in 2012 so I can't use my New Idea mounted picker anymore so I have been looking for a New Idea 3-row pull-type picker since then. I final...

Cornstover · Cornstover

Hi there. New user here. I have a 325 and some ears fell behind the elevator from the snappers to the husker and collected in the bottom. It is now completely jammed I can turn it with a pipe wrench and move the elevator a few inches back and forth. Any ideas how to free it up? Thanks

Albert · Albert

I have just purchased a New Idea hand Sheller I am trying to figure out the model number. All the tag says is HS95 . Would this be the model or lot number ? Sorry I do not have photos at this time but I can next week if this is needed. Thanks, Albert

stook · stook

http://www.bigiron.com/Lots/1958JohnDeere7202WDTractorwithCornPicker

fergie40 · fergie40

Some pictures of picking this fall.

ford9000puller · ford9000puller

Found a 4000 to put the very nice 602 picker on I bought a couple years ago. Picker has very little wear and has always been barn kept. Guy I got it from said his neighbor bought it new and it was only wet twice. Found the tractor not too far from home but had to overhaul the motor. The rest of the tractor was in g...

JimIa · JimIa

Looking into different varieties for ear picking. Modern varieties shell too easy causing high loss. I have heard people talking about open pollinated. Can anybody tell the good or the bad? Thanks Jim

Farmergene · Farmergene

I have the operator manual for the new idea 310 one row picker but cannot read pages 13 -15. Does anyone have these pages they could Share with me?

Art From De Leon · Art From De Leon

https://greenbay.craigslist.org/grd/5865879434.html

KA656 · KA656

This weekend I was picking ear corn at a neighbor's farm and he has a very late model NI 323. However, he is not happy with how much shell corn the picker makes. In comparison, ear corn from my IH 234 was making half as much shell corn as his NI 323. His snapping rolls are set as close as he can get them. He has h...

Shorty · Shorty

Intake elevator chain wont turn just slips at the clutch have loose chains and everything I know of and it still won't turn any input would be greatly appreciated

KA656 · KA656

Members, a friend of mine has been tossing around the idea of using his NI 319 on a Super M to pick 30" rows. He picked off some 30" rows on the headlands, slow but steady with no issues other than the tire nudging the next row. Which got him to think about using a narrower tire, but taller tire something aro...

DJ53 · DJ53

ford9000puller · ford9000puller

Wondering if anyone had a pair of rubber snapping rolls for a Ford picker. Putting one together for a friend and the quartz rolls on it have all the quartz falling off. He said he would prefer rubber ones but would probably take whatever he can get. Thanks

greenswede · greenswede

https://youtu.be/edN79XQVawg -- Edited by greenswede on Monday 24th of October 2016 11:05:16 AM -- Edited by greenswede on Friday 4th of November 2016 10:04:23 AM

greenswede · greenswede

John Deere and I-H mounted pickers coming through the field https://youtu.be/qBpcgeS1-7Q

Art From De Leon · Art From De Leon

Thanks for taking the time to provide the visual and aural enjoyment. -- Edited by Art From De Leon on Monday 24th of October 2016 02:54:22 PM

greenswede · greenswede

Thanks to Google for automatically creating this. I didn't have a clue until I stumbled across it in my file, ha! https://youtu.be/8m50dJaUBM0 -- Edited by greenswede on Monday 24th of October 2016 03:02:20 PM

greenswede · greenswede

Husker driven by JD "D" and the Sandwich sheller driven by mini Steam Engine https://youtu.be/6tDGqOub9Yg

greenswede · greenswede

I guess I was using copy & paste instead of attaching files. Got it figured out, sorry for inconvenience it may have caused -- Edited by greenswede on Monday 24th of October 2016 12:26:43 PM

Super A · Super A

How tall is a 2MH mounted on a M Farmall with 13.6-38 tires? Not concerned about the height of the elevator, just the picker on the tractor at its tallest point. thanks, Al

DJ53 · DJ53

https://www.youtube.com/watch?v=gF9wKwUKKpE&feature=youtu.be

DJ53 · DJ53

https://www.youtube.com/watch?v=8UVv4mQKbOA&feature=youtu.be

DJ53 · DJ53

A first time event was held Oct. 15 & 16 at the Robinson family farms south of Mechanicsville, IA. In addition to these IH pickers, there were also a New Idea and an Oliver mounted pickers. More photos will follow in subsequent posts. -- Edited by DJ53 on Saturday 22nd of October 2016 06:27:07 AM

KA656 · KA656

How about it fellas!?! Let's see your pictures or hear your stories about wooden corn cribs...long and narrow or the double sided or the simple snowfence variety. My dad and grandpa had a narrow one, maybe 20-24 feet in length. It did become a club house and jungle gym for my sisters and I as we grew up. I d...

Superpicker · Superpicker

Here is an interesting corn picker, a 227 used one season then parked in the shed for whatever reason. Someone needs to check it out and buy it. It sells this Sat. Aug. 6. Looks like they dug it out of the shed and got it mobile on a mover. Holbrook, Nebraska. http://www.hprealty.net/AUCPurinton.htm

KA656 · KA656

What are the odds of finding new snapping rolls for a NI 323 picker? Where can I get them? How much are they going to set me back? Kind of a different question: Has anyone ever tried to fabricate stripper plates for a NI 323? I have a corn picking friend who is interested in a way to have stripper plates on hi...

DJ53 · DJ53

Ever since my first participation in the corn picking event at the Don Struthers farm near Collins, IA. in 2013, I've wanted to take a group photo of all the M-powered pickers. I was able to do that on Saturday, October 15, 2016.

cdjdg · cdjdg

Had the pleasure of attending the picker reunion last Friday. I will share a few pictures here.

Topic		Started By	Replies	Views	Last Post
	234 Husking roll install (Preview) So we started tearing apart the husking bed on my 234 to get the rubber rolls out to have them rebuilt turns out to be a fair project, can anyone shed any light on how to get the driven gear off the steel husking roll. for some reason it seems to be more of a major project than first thought. Any info or insight...	Joe Hoover	0	1464	Thu Dec 29 21:19 2016 by Joe Hoover
	3-row Picking - Corn Harvest 2016 (Preview) Now that I'm finished with all of my corn harvest for 2016, I finally have some time to post some pictures of my ear corn harvest a few weeks ago. I switched to 30-inch rows in 2012 so I can't use my New Idea mounted picker anymore so I have been looking for a New Idea 3-row pull-type picker since then. I final...	jdtom	6	3094	Tue Dec 27 21:58 2016 by popularnet88
	Need some help feeder house jammed on new idea 325 (Preview) Hi there. New user here. I have a 325 and some ears fell behind the elevator from the snappers to the husker and collected in the bottom. It is now completely jammed I can turn it with a pipe wrench and move the elevator a few inches back and forth. Any ideas how to free it up? Thanks	Cornstover	6	2268	Tue Dec 27 21:57 2016 by popularnet88
	New Idea (Preview) I have just purchased a New Idea hand Sheller I am trying to figure out the model number. All the tag says is HS95 . Would this be the model or lot number ? Sorry I do not have photos at this time but I can next week if this is needed. Thanks, Albert	Albert	0	1562	Sat Dec 17 20:51 2016 by Albert
	720 with 227 on Bigiron (Preview) http://www.bigiron.com/Lots/1958JohnDeere7202WDTractorwithCornPicker	stook	0	1743	Fri Dec 9 11:49 2016 by stook
	Dearborn Corn Picker with 641 Workmaster Ford (Preview) Some pictures of picking this fall.	fergie40	1	1769	Sat Dec 3 13:43 2016 by greenswede
	Ford 4000 and 602 picker (Preview) Found a 4000 to put the very nice 602 picker on I bought a couple years ago. Picker has very little wear and has always been barn kept. Guy I got it from said his neighbor bought it new and it was only wet twice. Found the tractor not too far from home but had to overhaul the motor. The rest of the tractor was in g...	ford9000puller	2	2052	Thu Dec 1 16:49 2016 by pickertim
	Does anybody plant open pollinated corn? (Preview) Looking into different varieties for ear picking. Modern varieties shell too easy causing high loss. I have heard people talking about open pollinated. Can anybody tell the good or the bad? Thanks Jim	JimIa	4	1830	Wed Nov 30 18:09 2016 by JimIa
	Operator manual 310 (Preview) I have the operator manual for the new idea 310 one row picker but cannot read pages 13 -15. Does anyone have these pages they could Share with me?	Farmergene	0	1230	Sat Nov 19 19:29 2016 by Farmergene
	This Was Posted On Another Site (Preview) https://greenbay.craigslist.org/grd/5865879434.html	Art From De Leon	3	1687	Fri Nov 18 16:57 2016 by Bartlettfarms1854
	NI 323 shelling too much-What to do? (Preview) This weekend I was picking ear corn at a neighbor's farm and he has a very late model NI 323. However, he is not happy with how much shell corn the picker makes. In comparison, ear corn from my IH 234 was making half as much shell corn as his NI 323. His snapping rolls are set as close as he can get them. He has h...	KA656	3	1900	Sat Nov 12 20:33 2016 by KA656
	One row picker intake elevator chain wont turn (Preview) Intake elevator chain wont turn just slips at the clutch have loose chains and everything I know of and it still won't turn any input would be greatly appreciated	Shorty	2	1550	Tue Nov 8 11:46 2016 by Bleeding Orange
	Thoughts about picking 30" rows (Preview) Members, a friend of mine has been tossing around the idea of using his NI 319 on a Super M to pick 30" rows. He picked off some 30" rows on the headlands, slow but steady with no issues other than the tire nudging the next row. Which got him to think about using a narrower tire, but taller tire something aro...	KA656	2	2493	Tue Nov 8 11:27 2016 by Bleeding Orange
	More photos from Walnut, IL, 2016. (Preview)	DJ53	7	2170	Mon Nov 7 10:29 2016 by greenswede
	Rubber snapping rolls for Ford picker (Preview) Wondering if anyone had a pair of rubber snapping rolls for a Ford picker. Putting one together for a friend and the quartz rolls on it have all the quartz falling off. He said he would prefer rubber ones but would probably take whatever he can get. Thanks	ford9000puller	11	2350	Tue Nov 1 22:13 2016 by ford9000puller
	Photos from Ottumwa corn picking day (Preview) https://youtu.be/edN79XQVawg -- Edited by greenswede on Monday 24th of October 2016 11:05:16 AM -- Edited by greenswede on Friday 4th of November 2016 10:04:23 AM	greenswede	21	2665	Thu Oct 27 20:13 2016 by pickertim
	Ottumwa YouTube videos (short clips) (Preview) John Deere and I-H mounted pickers coming through the field https://youtu.be/qBpcgeS1-7Q	greenswede	10	1801	Mon Oct 24 22:34 2016 by greenswede
	My Thanks To ALL Who Have Posted Their Pictures Here (Preview) Thanks for taking the time to provide the visual and aural enjoyment. -- Edited by Art From De Leon on Monday 24th of October 2016 02:54:22 PM	Art From De Leon	1	1202	Mon Oct 24 16:12 2016 by greenswede
	Video/sledeshow from Struther's C.A.P.O.O.T. pickin & plowin (Preview) Thanks to Google for automatically creating this. I didn't have a clue until I stumbled across it in my file, ha! https://youtu.be/8m50dJaUBM0 -- Edited by greenswede on Monday 24th of October 2016 03:02:20 PM	greenswede	0	1590	Mon Oct 24 15:01 2016 by greenswede
	US Husker/Shredder and Sandwich sheller video from Ottumwa (Preview) Husker driven by JD "D" and the Sandwich sheller driven by mini Steam Engine https://youtu.be/6tDGqOub9Yg	greenswede	0	1289	Mon Oct 24 14:47 2016 by greenswede
	Photos vanished??? Solved (Preview) I guess I was using copy & paste instead of attaching files. Got it figured out, sorry for inconvenience it may have caused -- Edited by greenswede on Monday 24th of October 2016 12:26:43 PM	greenswede	0	1173	Mon Oct 24 10:43 2016 by greenswede
	2MH height on a M (Preview) How tall is a 2MH mounted on a M Farmall with 13.6-38 tires? Not concerned about the height of the elevator, just the picker on the tractor at its tallest point. thanks, Al	Super A	0	1160	Mon Oct 24 07:46 2016 by Super A
	Five IH pickers running at Mechanicsville, IA, Oct. 2016 (Preview) https://www.youtube.com/watch?v=gF9wKwUKKpE&feature=youtu.be	DJ53	0	1581	Mon Oct 24 07:10 2016 by DJ53
	Hand crank starting a Farmall F-20 with 2ME picker (Preview) https://www.youtube.com/watch?v=8UVv4mQKbOA&feature=youtu.be	DJ53	0	1562	Sun Oct 23 16:39 2016 by DJ53
	Corn picking event at Mechanicsville, IA. (Preview) A first time event was held Oct. 15 & 16 at the Robinson family farms south of Mechanicsville, IA. In addition to these IH pickers, there were also a New Idea and an Oliver mounted pickers. More photos will follow in subsequent posts. -- Edited by DJ53 on Saturday 22nd of October 2016 06:27:07 AM	DJ53	3	1298	Sat Oct 22 22:04 2016 by TNLee
	Wooden Corn Cribs (Preview) How about it fellas!?! Let's see your pictures or hear your stories about wooden corn cribs...long and narrow or the double sided or the simple snowfence variety. My dad and grandpa had a narrow one, maybe 20-24 feet in length. It did become a club house and jungle gym for my sisters and I as we grew up. I d...	KA656	29	15965	Sat Oct 22 20:17 2016 by KA656
	227 picker- used 1 season (Preview) Here is an interesting corn picker, a 227 used one season then parked in the shed for whatever reason. Someone needs to check it out and buy it. It sells this Sat. Aug. 6. Looks like they dug it out of the shed and got it mobile on a mover. Holbrook, Nebraska. http://www.hprealty.net/AUCPurinton.htm	Superpicker	4	1592	Fri Oct 21 14:26 2016 by Tim in NJ
	New snapping rolls for NI 323 (Preview) What are the odds of finding new snapping rolls for a NI 323 picker? Where can I get them? How much are they going to set me back? Kind of a different question: Has anyone ever tried to fabricate stripper plates for a NI 323? I have a corn picking friend who is interested in a way to have stripper plates on hi...	KA656	1	1349	Fri Oct 21 14:22 2016 by Tim in NJ
	M-powered pickers at Collins, IA (Preview) Ever since my first participation in the corn picking event at the Don Struthers farm near Collins, IA. in 2013, I've wanted to take a group photo of all the M-powered pickers. I was able to do that on Saturday, October 15, 2016.	DJ53	7	1618	Fri Oct 21 08:33 2016 by cdjdg
	Walnut corn picker reunion (Preview) Had the pleasure of attending the picker reunion last Friday. I will share a few pictures here.	cdjdg	0	1217	Thu Oct 20 08:27 2016 by cdjdg
«First < 1 … 4 5 6 7 8 … 44 > Last» \| Page of 44 sorted by